Quick Answer:Butyric Acid (Butyric Acid, systematic name Butanoic Acid) is a four-carbon straight-chain saturated fatty acid, CAS No. 107-92-6, molecular formula C4H8O2. Procurement personnel should not place an order based solely on the two words "butyric acid", but should also verify the chemical name, CAS, target use, required specifications, quality documents and packaging and transportation conditions.

There is already a basic article on the website introducing the properties and uses of butyric acid. This guide does not repeat encyclopedia content, but answers a question closer to the procurement link: how to use basic parameters to confirm that the purchased product is correct and clearly express the inquiry requirements.

Key Identification Information of Butyric Acid

These information is for entity recognition, not product quality commitment. Commercial products with the same CAS may still not be interchangeable due to different grades, index controls, packaging, documents, and intended uses. Specific specifications shall be subject to the current TDS and batch COA of the supplier.

Why name verification cannot be omitted

Butyric Acid and Butanoic Acid usually refer to the same compound; "butyrate" may refer to butyrate radical or butyrate, and should not be directly equivalent to free butyric acid. Sodium butyrate, calcium butyrate and butyric acid also differ in form, formulation position, operation mode and transportation considerations. If the inquiry sheet only writes butyrate, it is difficult for the supplier to judge whether the buyer needs free acid, salts or compounding solutions.

Another common problem is taking usage keywords as grade conclusions. For example, "for feed" does not automatically mean that a batch of products complies with the feed regulations of the destination country; "industrial use" cannot replace specific indicators. Buyers should state the final application and require suppliers to confirm the appropriate documents accordingly.

How to coordinate between procurement documents

TDS: First look at product definition and typical specifications

TDS is used to understand general information such as product name, main technical indicators, recommended storage and transportation conditions, etc. It is suitable for pre-purchase screening, but cannot replace specific batch test results.

COA: Check specific batches

COA should correspond to the actual batch. When auditing, confirm whether the product name, batch number, test items, results and judgment basis are complete and consistent with the contract agreement. Do not ask suppliers to provide fictional test values when the product and batch are not determined.

SDS: For safety and compliance communication

SDS focuses on hazard identification, operation protection, leakage disposal, storage and transportation communication. Logistics providers, warehouses and importers should also complete their own compliance judgments according to the actual packaging, transportation methods and destination regulations.

If you need to know the relevant product range of ADDEASY, you can viewButyric Acid and salts supply pageandfine chemical business.

What information should be provided at least when inquiring

• Product name: Butyric Acid / Butanoic Acid;
• CAS: 107-92-6;
• Final use and target market;
• Required specifications or buyer's technical standards;
• Expected purchase quantity and frequency;
• Packaging requirements, port of destination and expected trade terms;
• Required documents, such as COA, SDS, TDS.

Soft inquiry tips:If you are verifying the identity of butyric acid products, you can send the existing specification sheet or key indicators to ADDEASY, and state the use, quantity and port of destination. We can assist in confirming which product information should be further requested.

How to verify the supplier's parameter response

The first step is to check whether the names, CAS numbers and product descriptions in different documents are consistent; if the quotation sheet writes Butyric Acid, but the SDS or COA shows salts, mixtures or other CAS numbers, confirmation should be suspended. The second step is to distinguish between "typical values", "limits" and "batch results", and do not directly write the example numbers in the promotional materials into the acceptance criteria.

The third step is to convert the oral response into a written attachment. Usage adaptation, target indicators, packaging, labels, document language, and change notifications can all be included in the technical agreement or order remarks. This is not only convenient for incoming material inspection but also enables quick judgment on whether re-approval is needed when batch or supply conditions change.

For the first cooperation or key processes, the buyer can also arrange samples, sample retention, third-party testing, or small-scale verification according to internal risk procedures. The verification plan should explain in advance the representativeness of the samples, the testing methods, and the passing standards to avoid discovering different understandings between the two parties after the goods arrive at the port.

FAQs

Question: Are Butyric Acid and Butanoic Acid two products?

Answer: Usually not. The former is the common name, and the latter is the systematic name. Both generally refer to butyric acid with CAS 107-92-6. Commercial procurement still needs to check the grade, indicators, and documents.

Question: Is it sufficient to only check CAS?

Answer: Not enough. CAS is used to identify chemical entities, but it cannot explain purity, impurities, grade, packaging, or regulatory applicability. TDS, COA, SDS, and contract terms should also be reviewed.

Question: Can C4H8O2 be used as a procurement specification?

Answer: The molecular formula can only help confirm the identity of the substance, not replace the quality specification. The actual inspection items should be determined by the usage, process, and requirements of the destination country.

Question: Can butyric acid and butyrates be directly replaced?

Answer: Direct replacement cannot be defaulted. Free butyric acid is different from sodium butyrate and calcium butyrate in form, formula, and operation requirements. It should be evaluated by technicians in combination with application.

Question: How to obtain the latest materials from ADDEASY?

Answer: Please pass throughcontact us to obtain butyric acid materials, provide the purpose, target specifications, quantity, packaging and port of destination, and then confirm the current TDS, COA, SDS and quotation.

Do you need to check the procurement information of butyric acid?

Please provide ADDEASY with the product purpose, target specifications, expected purchase quantity, packaging requirements, port of destination, and FOB, CIF or CNF requirements. We will further confirm the available information and supply solutions according to the actual order conditions; the specific specifications, packaging, delivery time and price shall be subject to the final confirmation of both parties.